EasyDECON

EasyDECON® DF200 is a three‑part, activated‑peroxide solution for rapid neutralisation of chemical and biological threats and everyday pathogens. It’s inherently biodegradable, non‑chlorine based and deploys as a liquid spray, foam or fog using standard equipment or Intelagard CAFS/handsets.

Key features

• Broad decon performance: proven against chemical warfare agents, biological agents, viruses and many TICs/TIMs.
• EPA registered & List N: US EPA Reg. No. 74436‑1/‑2; listed for use against SARS‑CoV‑2.
• Three‑part “mix on demand” system: separate Parts 1, 2 and 3 for shelf stability and reliable activation on use.
• Flexible application: deploy as spray, foam or fog for coverage and dwell time; foam clings to vertical/inverted surfaces.
• Inherently biodegradable, low‑corrosive: designed to be equipment‑friendly compared with hypochlorite solutions.
• Kits to suit your operation: 7.6 L (2 US gal), 18.9 L (5 US gal), 379 L (100 US gal) and 1,893 L (500 US gal) kits, plus training solution.

Technical specifications

• Chemistry/system: three‑part system — surfactant/detergent (Part 1), hydrogen‑peroxide activator (Part 2), booster (Part 3).
• Application modes: liquid spray, foam, fog/mist (compatible with Intelagard CAFS and handsets).
• Operating temperature (typical): approx. −17 to +55 °C.
• Shelf life (unopened): > 5 years; Parts 1 & 3 up to ~20 years; Part 2 ~6–8 years (store out of sunlight, 5–27 °C).
• Regulatory: US EPA Reg. No. 74436‑1 and 74436‑2; on EPA List N.
• Packaging options: 2, 5, 100 and 500 US gal kits (approx. 7.6, 18.9, 379 and 1,893 L) and training solution kits.

Applications

• CBRN / HAZMAT: neutralisation of CW agents, biologicals and many toxic industrial chemicals
• Public facilities & healthcare: List N disinfectant use per label
• Mould remediation & odour control
• Decontamination lanes: foam coverage with Intelagard CAFS/handsets for vertical and complex surfaces

What’s included

• EasyDECON® DF200 Parts 1, 2 and 3 packaged by kit size
• Use instructions / mixing guidance

Options & related products

• Intelagard CAFS platforms (SwiftCAF®, Viper™ series) and BDAS+ ready‑to‑use sprayers for rapid application
• Nozzles and fogging accessories
• Training solution kits

Compliance & handling

Use strictly as directed on the product label and SDS. Observe local regulations for disinfectant/decontaminant use and waste handling. For CBRN response, follow agency SOPs.

Maintenance & support

Store sealed out of sunlight between 5 and 27 °C. J3Seven provides product selection help, SDS and after‑sales support Australia‑wide.

FAQs

Is DF200 on EPA List N?
Yes — EasyDECON® DF200 is EPA registered (Reg. No. 74436‑1/‑2) and appears on EPA List N for SARS‑CoV‑2 when used per label.

How is it applied?
As liquid spray, foam or fog. Foam enhances dwell time and visual coverage; CAFS and BDAS+ make deployment fast and consistent.

What about shelf life?
Unopened kits are rated beyond 5 years with Parts 1 & 3 typically up to ~20 years and Part 2 ~6–8 years when stored correctly.

What kit sizes are available?
Approx. 7.6 L, 18.9 L, 379 L and 1,893 L kits (2, 5, 100 and 500 US gal), plus a training solution.