Decon Plus

Decon PLUS™ is a dry‑chemistry, three‑part decontaminant for rapid response. Each kit contains sealed pouches you mix at the point of use with locally available water — fresh, brackish or salt — producing a working solution with an 8+ hour pot life. The surfactant‑based formulation avoids organic solvents to improve material compatibility and simplify shipping and handling.

Key features

• Low‑logistic format: dry powders in laminated foil pouches for long shelf life and easy transport; ~90% less weight/volume than typical liquid systems.
• Mix with any water: fresh, brackish or salt water at the point of use; no special diluent required.
• Extended working time: once mixed, the solution remains usable for more than 8 hours.
• Broad threat coverage: tested by US DoD labs against chemical agents (e.g., VX, GD, HD) and biological contamination.
• Easy application: thoroughly wet contaminated surfaces, allow to dry; apply by hand or via spray systems (pressure washer, electrostatic sprayer, etc.).

Technical specifications

• System type: three‑pouch dry chemistry (surfactant‑based); mix on demand for use.
• Water compatibility: fresh, brackish or salt.
• Pot life (once mixed): > 8 hours.
• Weight/volume savings: approx. 90% vs conventional liquid decontaminants.
• Primary actions: neutralises chemical agents; effective on biological contamination per DoD testing.
• Application methods: manual or spray (pressure washer, electrostatic sprayer, etc.).

Kit sizes & ordering codes

• DP‑M333‑CT15‑500 mL — Decon PLUS 500 mL kit (15 kits/carton)
• DP‑M333‑CT06‑05GL — Decon PLUS 5 gal kit (≈ 18.9 L; 6 kits/carton)
• DP‑M333‑CT01‑25GL — Decon PLUS 25 gal kit (≈ 94.6 L; 1 kit/carton)

Additional sizes appear in the product datasheet (e.g., 18 oz ≈ 532 mL and 48 oz ≈ 1.42 L).

Applications

• CBRN/HAZMAT decontamination of equipment and hard surfaces
• Vehicle, tools and infrastructure wash‑downs
• Rapid, field‑mixed response where liquids are impractical

What’s included

• Three sealed chemistry pouches per kit (laminated foil for shelf life)
• Use instructions (mixing and application)

Options & related products

• Pump/tactical sprayer accessory for Decon PLUS
• Integration in COMIT/TEK‑TAK decontamination kits

Maintenance & support

Store sealed pouches in a cool, dry place. Mix only what you will use within the pot‑life window. J3Seven provides local supply, SDS and after‑sales support Australia‑wide.

FAQs

How do I mix it?
Open the pouches and add to locally available water (fresh, brackish or salt). Swirl or agitate per instructions until dissolved, then apply to thoroughly wet the surface.

How long is the solution usable once mixed?
Typically more than 8 hours under normal conditions.

Does it work on biological contamination?
It has been tested by DoD labs against biological contamination; however, note the datasheet’s regulatory statement that it is not US‑EPA registered for biological decon. Follow your regulator’s guidance.

What kit sizes are available?
500 mL, 5 gal (≈ 18.9 L) and 25 gal (≈ 94.6 L) on the product page; additional sizes (18 oz, 48 oz, 2 gal).