Sew‑On Glow‑in‑the‑Dark Reflective Tape
CyFlect® Sew‑On Honeycomb Tape
CyFlect® Sew‑On Honeycomb Tape
Contact J3Seven to check current availability across all widths and to confirm the best option for your application before ordering.
Be seen in the dark — and be seen when light hits you.
CyFlect® Sew‑On Honeycomb Tape is a dual‑function safety marking tape designed for textiles and soft goods where adhesives aren’t ideal. The honeycomb surface is both photoluminescent (charges from ambient/natural or electric light and glows in darkness) and retro‑reflective (reflects bright white when a light source is directed at it), helping improve visibility in low‑light, emergency, and outdoor environments.
This is the sew‑on format, making it a strong fit for jackets, packs, hats, tents, canvas, webbing and other sewable surfaces that need durable marking and identification.
Why teams choose CyFlect® sew‑on tape
- Dual‑mode visibility: reflects white under torch/headlight beams and glows in darkness after a short charge.
- Works in harsh conditions: designed to be visible through fog and smoke and retain reflective performance even when wet.
- Built for textiles: sew‑on format suits uniforms, packs, tents and other soft goods where adhesives may fail over time.
- All‑angle visibility: honeycomb/prismatic pattern supports wide‑angle reflectivity for better recognition.
Common applications
- Uniforms, jackets, vests, rain gear and PPE
- Backpacks, rucksacks, load carriage and webbing
- Tents, tarps, canvas, field shelters and covers
- Emergency response identification and equipment marking
- Outdoor navigation and safety marking (camp/vehicle gear)
Available sizes (CyFlect® sew‑on roll range)
CyFlect® sew‑on honeycomb tape is available in multiple widths to match your marking plan:
| Width | Length | SKU | Notes |
|---|---|---|---|
| 25 mm (1″) | 45 m (150′) | 9-30007 | Low‑profile trim, packs, straps, smaller panels |
| 38 mm (1.5″) | 45 m (150′) | 9-30008 | Balanced width for uniforms and general equipment marking |
| 50 mm (2″) | 45 m (150′) | 9-30009 | Maximum coverage for high‑visibility panels and larger surfaces |
Key details
- Product type: sew‑on honeycomb tape (photoluminescent + retro‑reflective)
- Colour: white
- Primary use: identification, signalling and marking on textiles/soft goods
Installation note
For best results, sew onto clean, dry fabric using appropriate thread and stitch patterns for the material and expected wear. If you’re unsure which width or placement is best, J3Seven can help recommend a practical layout for your gear or uniform design.
Upgrade visibility and identification on uniforms and equipment with durable sew‑on CyFlect® tape. Contact J3Seven to confirm availability and select the right width for your use case.
Frequently asked questions
Does CyFlect® need batteries or power?
No. It’s photoluminescent: it charges from natural or electric light and glows in darkness, and it’s also retro‑reflective when a light source is directed at it.
Which width should I choose?
Choose 25 mm for low‑profile trim, 38 mm for general uniform/equipment marking, and 50 mm for maximum surface visibility. If you tell us what you’re marking, J3Seven can recommend the best width.
Can you confirm availability before we order?
Yes — contact J3Seven and we’ll confirm current availability and lead times across all sew‑on widths.